At a construction site, machines often work in dusty and dirty conditions. That’s where the air filter element comes in—it’s like the machine’s lungs. It keeps dust and other harmful stuff from getting into the engine. This helps protect the machine from serious damage.
But the air filter isn’t something you should just swap out all the time. Replacing it too often can waste a lot of money. With proper care, a good filter can last for years. You’ll save cash and keep your machine running strong.
Daily maintenance is the Most Important
The first step to extend the life of equipment is to start with basic maintenance. You may think that operations such as changing engine oil and checking hydraulic oil have little technical content, but it is these routines that determine whether the equipment can go to the maintenance station less.
A Few Key Operations:
The lubrication system must be maintained in place: regularly replace engine oil, gear oil, and hydraulic oil. Using high-quality lubricants can reduce internal friction and extend the service life of parts.
The hydraulic filter cannot be delayed for too long: Many people wait until there is a problem with the hydraulic system before changing the filter. In fact, it should be replaced regularly according to working hours to avoid impurities damaging the system.
Daily inspections cannot be a formality: Checking whether the bolts are loose, whether the seals are aging, whether there is oil leakage, abnormal noise, etc., is the most direct way to discover early faults.
It is no exaggeration to say that an owner with a “maintenance consciousness” can extend the service life of the equipment by 2-3 years compared to others.
Choose High-quality Parts
No matter how scientific the maintenance is, it cannot resist the natural law of part aging. When the key parts have reached the replacement cycle, if you choose inferior accessories, not only will the problem not be solved, but it may also increase wear and bring more maintenance costs.
At this time, it is particularly important to choose the right brand and channel. Pay attention to matching brands and models. If you want to buy CASE parts, FridayPars is a trustworthy choice. It sells accessories for brands such as CASE, with high matching, convenient installation, and no additional adjustments.
Suggestion: When replacing parts, try to “replace the whole set”, such as replacing the filter together with the oil and seal ring to avoid poor compatibility between new and old parts.
Regular Inspection
The earlier the equipment problem is discovered, the lower the handling cost. Many major failures may be just a small pressure anomaly or temperature fluctuation at first.
It is important to establish a system inspection mechanism:
Conduct a comprehensive inspection every 500 hours: Check whether there are hidden dangers in the hydraulic, fuel, and circuit systems.
Pay attention to equipment operation data: Many CASE equipment now have smart terminals to monitor data such as oil temperature, load, and fuel efficiency. Abnormal fluctuations are warnings.
Ask professional technicians to do annual maintenance a ssessments: Even if there are no obvious problems, an annual inspection can fully grasp the status of the equipment and plan the replacement cycle and budget in advance.
You can regard this regular inspection as an equipment physical examination package, spending a little money to avoid major failures.
Conclusion
Equipment is not the newer the better, but the more stable the equipment is, the more valuable it is. Many old CASE equipment that have been running on construction sites for more than ten years are still the backbone of the team. They rely not on luck, but on long-term standardized maintenance, professional judgment, and selection wisdom.
If you also want your old machine to continue to win the battle, start making plans now, from high-quality parts selection, strict daily maintenance, to scientific physical examination arrangements, don’t miss a step. Old equipment can still work; the key is whether you give it enough weapons and nutrition.
At FridayParts, we focus on providing reliable and compatible CASE parts and other mainstream brand accessories, not only with guaranteed quality, but also with transparent prices. Whether you want to extend the life of your equipment or replenish your spare parts warehouse, welcome to take a look. We will be your trusted parts supply partner.
